X’TOWER

The most profitable scaffold on the market
This is Tubesca patented 2016 innovation. A rolling Access Tower allowing any user to reach 4.8m working height.  Our Best seller – the 2.8 Meter platform – is assembled in 7 minutes. The 2.0 m platform is assembled in 3 minutes.  

This tower has been designed for maintenance, restoration and builders in mind – All components including micro adjustable stabilizers, toe-boards and integrated guardrails are already pre-assembled, enabling the user just to set it up at its desired height. The height can be adjusted every 10” (250mm) to ensure that all kind of tasks can be comfortably carried out. For uneven surface, we do have adjustable 150mm castors wheels to always ensure a work on a level base or even 1 full step offset floor. The incrementation is done every 12.5mm up to 175mm.

Each ladders element is composed of 3 push up ladders with a locking mechanism. The Aluminium rungs are all welded to prevent any failure commonly seen on telescopic ladders. The X tower is a mechanical tower with mechanical parts. Everything can be easily replaced. The minimum platform height is 1.3m. Its folded dimensions thanks to the integrated folded base are 1.34m high x 0.98 x 0.82m and will fit in a van or a combi or in lift.

The X tower is naturally conformed to EN-1004-1.

Z’TOWER

The companion for all your construction sites
This is Tubesca patented 2022 innovation. A rolling Access Tower allowing any user to reach 3.8m working height. It is assembled in 2 minutes.

This tower has been designed for main maintenance and HVAC Skilled workmen in mind. To the exception of the toe boards, all components are already pre-assembled, enabling the user just to set it up at its desired height. The height can be adjusted every 10” (250mm) to ensure that all kind of tasks can be comfortably carried out. In terms of comfort, we have designed this tower with telescopic braces and diagonals, which are quickly and easily set up. However, it was important to keep the ladders in a heavy duty welded style to safekeep the good functioning of the tower over time. The user can work from a platform height at 0.3m and up to 1.8m with a height adjustment of 250mm. The stabilizers are fully retractable and will allow the unit once folded to reach 1.57m high x 0.69m x 0.95m allowing the unit to pass through internal door, lift and to fit into vans and Combi. It is equipped with non-tracking 125mm wheels which facilitate the trip from the vehicle to the work site and to prevents flooring damages and can be used as such in many various places.

The Z tower is a mechanical tower with mechanical parts. Everything can be easily replaced. It is naturally conformed to EN-1004-1.